NEWS

  • The Bunker Belt Solving Material Handling Challenges in Fiber Silos

    2026-11-18 The Bunker Belt Solving Material Handling Challenges in Fiber Silos

    In the production of wood-based panels (MDF, particleboard, OSB), the storage and conveying of materials like wood chips, wet fibers, and dry fibers are critical. The Metering Belt (Bunker Belt) is the "heart" of the silo system, ensuring smooth discharge and preventing blockages or overfl...

  • Silicone-Coated Intermediate Belts for MDF and Particleboard

    2026-11-18 Silicone-Coated Intermediate Belts for MDF and Particleboard

    In the production of modern wood-based panels (MDF, OSB, particleboard), the stable operation of Continuous Presses and Multi-opening Presses determines board quality and line capacity. The intermediate belt is a critical consumable that carries the mat into the press and transfers it through the hi...

  • Sanding Belt for MDF and Particleboard: Selection Guide

    2026-11-17 Sanding Belt for MDF and Particleboard: Selection Guide

    Quick Answer For raw MDF and particleboard on an industrial wide-belt line, an antistatic silicon-carbide wide belt is the best starting choice. Use heavy polyester-cloth-backed silicon carbide for calibration and heavy antistatic paper-backed silicon carbide for intermediate and fine finishing. ...

  • Choosing the Right Belt Brush Supplier for MDF and Particleboard Plants

    2026-11-17 Choosing the Right Belt Brush Supplier for MDF and Particleboard Plants

    An endless PVC belt brush is a specialized Forming Belt variant. It features a seamless PVC base with rows of bristles embedded in it. It is designed to handle the delicate wood fiber or particle mat while performing a cleaning function. As the belt rotates, the bristles come into contact with th...

  • Z-Splice or Spiral Joint ? How to Choose the Right Joint for an Industrial Conveyor Belt

    2026-11-15 Z-Splice or Spiral Joint ? How to Choose the Right Joint for an Industrial Conveyor Belt

    Are you replacing a forming belt, pre-press belt or mesh belt? Have you checked whether the new belt should use a Z-splice, spiral ring, double pin or steel clip joint? The connection method is often overlooked during purchasing. However, it can affect installation, maintenance, belt surface cont...

  • Mat Forming Belts in Continuous Press Production: Stability, Flatness, Durability, and Cost

    2026-11-15 Mat Forming Belts in Continuous Press Production: Stability, Flatness, Durability, and Cost

    On a continuous press line, the forming belt doesn't get the attention that the steel belt does, but its position is extremely critical. Fibers or particles fall from the metering bin and, before entering the pre-press, are entirely carried, conveyed, and tracked by the forming belt. The init...

  • Perforated Pre-Press Belt: Why the Hole Design Matters in MDF Production

    2026-11-15 Perforated Pre-Press Belt: Why the Hole Design Matters in MDF Production

    Looking for a perforated pre-press belt for your MDF and HDF line? Do you know why the belt needs holes and what information is required to order a replacement ? A perforated pre-press belt is designed for applications where air release through the belt is part of the pre-pressing process. Its op...

  • How to Choose the Right Deaeration Belt for an MDF Production Line

    2026-11-13 How to Choose the Right Deaeration Belt for an MDF Production Line

    Quick Answer Choose a deaeration belt by matching measured air permeability, mesh size and antistatic construction to your prepress design, fiber characteristics and operating conditions. Verify mechanical fit, seam quality and cleaning compatibility against the machine OEM specification, and agr...

  • Special Conveyor Belt for Finished Wood-Based Panels: Reliable Transfer in the Finishing Section

    2026-11-12 Special Conveyor Belt for Finished Wood-Based Panels: Reliable Transfer in the Finishing Section

    Are you looking for a special conveyor belt for finished MDF, HDF, particleboard or OSB panels? What should you consider when replacing a belt in the board handling section? In wood-based panel manufacturing, finished boards pass through several downstream processes after pressing. These may incl...

FIRSTprevious pageLAST