NEWS

  • How to Choose the Pre-Heater Belt for Steam Injection in Continuous Press Lines?

    2026-11-11 How to Choose the Pre-Heater Belt for Steam Injection in Continuous Press Lines?

    On a continuous press production line, steam injection equipment is a critical component for increasing output and reducing energy consumption. However, while many focus on steam injection valve assemblies, they often overlook the steam pre-heater belt—the component that directly supports the ...

  • Forming Belt Selection for Particleboard Production Lines

    2026-11-09 Forming Belt Selection for Particleboard Production Lines

    Selecting a forming belt for a particleboard line is mainly a matter of matching the belt to the mat-forming position, particle size, line speed, load, and static/glue conditions. The right belt ensures uniform mat thickness, consistent particle distribution, and reliable long-term operation —...

  • Pre-Press Belt Selection for Wood-Based Panel Lines

    2026-11-06 Pre-Press Belt Selection for Wood-Based Panel Lines

    Selecting a pre-press belt is primarily about matching the belt's tension-member strength, surface release, permeability, and tracking stability to your panel type, mat width, press load, and line speed. For most MDF/HDF and particleboard lines, a low-elongation, aramid-reinforced, polyurethane-...

  • PU Lifting Belts: Solving the Heavy Panel Handling Conflict

    2026-11-05 PU Lifting Belts: Solving the Heavy Panel Handling Conflict

    A PU lifting belt combines a high-tensile steel wire core with a polyurethane outer layer. This structural design allows wood-based panel factories to lift multi-ton MDF, HDF, or particleboard blanks without causing surface scratches or indentations, while maintaining the dimensional stability requi...

  • MDF Mat Ventilation: How Deaeration Belts Improve Pre-Pressing

    2026-11-04 MDF Mat Ventilation: How Deaeration Belts Improve Pre-Pressing

    In MDF (Medium Density Fiberboard) production, effective air removal during the pre-pressing process is essential for achieving stable mat formation and consistent board quality. During mat forming, a certain amount of air remains trapped between wood fibers. If this air is not released efficiently ...

  • What information do I need to order a replacement pre-press belt?

    2026-10-30 What information do I need to order a replacement pre-press belt?

    A pre-press belt is a continuous conveyor belt located between the forming station and the hot press. It compresses the loosely formed mat and transports it into the Continuous Press Machine. It operates under high tension and must resist aggressive resin chemicals. The belt is driven by hea...

  • Dynasteam Belt: Improving Steam Permeability and Process Stability in Wood-Based Panel Production

    2026-10-17 Dynasteam Belt: Improving Steam Permeability and Process Stability in Wood-Based Panel Production

    In modern wood-based panel manufacturing, steam injection plays an important role in preparing the mat for the pressing process. The performance of the steam injection system depends not only on steam supply and process control, but also on the conveying belt used in the steaming section. The Dyn...

  • 2026 Recommended Preheating Belts for Wood-Based Panel Lines: Matpre-heater, Dynasteam & Microwave Belts

    2026-09-27 2026 Recommended Preheating Belts for Wood-Based Panel Lines: Matpre-heater, Dynasteam & Microwave Belts

    In modern wood-based panel production, preheating is an important step before hot pressing. Raising the temperature of the mat before it enters the press can help improve heat transfer and support higher production efficiency. For this reason, the belt used in the preheating section is not simply...

  • PB Belt: The Key Metering Belt for Stable Material Discharge from Particle Belt Scale Systems

    2026-09-20 PB Belt: The Key Metering Belt for Stable Material Discharge from Particle Belt Scale Systems

    In a wood-based panel production line, material does not simply move from one machine to another. Wood particles, fibers, chips and strands need to be supplied to each process at a controlled and consistent rate. This is especially important when material is stored inside a Particle Belt Scale...