Reasons of the conveyor belt working surface broke?

Rubber conveyor belts will inevitably undergo various damages during use. For example, various strip-shaped sharp tools mixed in during the transportation process, such as welding rods, steel drills, etc., may become embedded in the conveyor belt at any time and cause longitudinal tearing (especially prone to occur on round pipes). Conveyor belts and steel wire core conveyor belts) or use mechanical belt openings to fall off, idlers are damaged, steel wire rope cores are exposed, and blanking ribs are damaged, causing the conveyor belt to deviate, which can cause longitudinal tearing of the conveyor belt. It is relatively easy to use rubber repair agent to repair the above defects, which is faster and more economical than vulcanization repair. Rubber repair agent is a prepolymerized compound, which is a two-component liquid at room temperature. It is mixed in proportion and self-vulcanized into polyurethane rubber. It solidifies at room temperature and has good bonding with conveyor belts and metal bodies. The body has high elasticity and high wear resistance. properties and high toughness. Rubber repair agent is very effective in repairing longitudinally torn rubber steel core strips, but it cannot be used as an adhesive. For partial damage on the surface of the conveyor belt, when the diameter is not larger than 1/5 of the bandwidth, the conveyor belt still has sufficient overall strength and can be repaired with repair fluid without leakage.