Conveyor belt joint method

All conveyor belts must be connected in a ring shape before they can be used, so the quality of the conveyor belt joints directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly. Commonly used methods for conveyor belt joints include mechanical joints, cold bonded joints, hot vulcanized joints, etc.

Conveyor belt mechanical joint method: Generally refers to the use of belt buckle joints. This joint method is convenient and economical, but the joint efficiency is low and easy to damage, which has a certain impact on the service life of the conveyor belt product. Among PVC and PVG whole-core flame-retardant and anti-static conveyor belt joints, this joint method is generally used for products below grade 8 belts.

Conveyor belt cold bonding joint method: that is, cold bonding adhesive is used for jointing. This joint method is more efficient and economical than mechanical joints, and should be able to produce better joint results. However, from a practical point of view, because the process conditions are difficult to master, and the quality of the adhesive has a great impact on the joint, So it's not very stable.

Conveyor belt hot vulcanization joint method: Practice has proven to be the most ideal joint method, which can ensure high joint efficiency, is also very stable, has a long joint life, and is easy to master. However, there are disadvantages such as troublesome process, high cost, and long joint time.