NEWS

Perforated Pre-Press Belt: Why the Hole Design Matters in MDF Production

Date Issued:2026-11-15

Looking for a perforated pre-press belt for your MDF and HDF line? Do you know why the belt needs holes and what information is required to order a replacement ?

A perforated pre-press belt is designed for applications where air release through the belt is part of the pre-pressing process. Its opening design should work together with the mat structure, compression conditions and the machine's air extraction arrangement.

Application: Between Mat Forming and Continuous Pressing

In a typical wood-based panel production line, the pre-press belt works after the forming section and before the continuous hot press.

The freshly formed mat is relatively loose and contains air between fibers, particles or strands. As the mat passes through the pre-press section, pressure reduces its thickness and helps form a more compact mat for downstream handling and pressing.

A perforated belt may be selected when the process requires air to pass through the belt during this compression stage.

 

Main Function: Creating Air Passageways During Compression

Why are holes necessary?

The perforations create openings in the belt through which air can pass. When matched with the machine's ventilation or extraction design, these openings can support air release from the mat.

The potential process benefits include:

  1. Air release support: Provides passages for air to leave the mat during compression.

  2. Mat compaction support: Helps the pre-press system manage air as the mat thickness decreases.

  3. Process coordination: Works as part of the overall pre-press and air-management arrangement.

The result depends on the complete system. A perforated belt alone does not guarantee a specific deaeration rate or board-quality improvement.

Key Design Factors for a Perforated Pre-Press Belt

A suitable belt should be evaluated by more than its overall dimensions.

Item Information to confirm
Belt dimensions Length or circumference, width and thickness
Hole design Diameter, spacing, pattern and open area
Belt construction Surface material and reinforcement
Joint Joint type, position and running requirements
Machine conditions Pulley diameter, tension, speed and installation
Process environment Resin system, temperature and operating conditions

The hole pattern is especially important. Excessively large or poorly positioned openings may not suit the mat structure or machine design. The hole layout should therefore be confirmed against the actual application.

Explore the Pre-press Belt without Perforated and Pre-press Belt with Perforated

 

Perforated Pre-Press Belt vs. Deaeration Belt

These two belt types are related to air management, but they should not automatically be treated as interchangeable.

A perforated pre-press belt conveys and compresses the mat while providing openings for air passage through the belt.

A deaeration or airing belt is designed specifically to support airflow and air removal in its designated position in the forming or pre-press system.

Their structure, installation position and operating requirements may differ. Always check the machine layout before choosing a replacement.

Learn more about Deaeration Belt with Carbon Fiber and Deaeration Belt with Copper Wire

 

No Original Drawing? We Can Help Prepare a Proposed Drawing

Many factories need replacement belts but cannot provide the original technical drawing.

This may happen when the production line has been operating for many years, the original supplier is no longer available, or the belt specification was never properly archived.

You can still begin the replacement assessment with the following information:

  • Machine manufacturer, model and production line type

  • Belt width, total length or circumference, and thickness

  • Photos of the existing belt and its joint

  • Hole diameter and spacing, if available

  • Installation photos showing the belt path and pulleys

  • Previous belt specifications or purchase records, if available

If the hole layout cannot be measured accurately, please provide clear close-up photos with a ruler for reference.

After reviewing the information, we can discuss the proposed construction and prepare a technical drawing for your confirmation before production.

 

Customized Replacement Support

Every pre-press system has its own mechanical arrangement and operating conditions. A replacement belt should be checked against the original installation rather than selected only by a general product description.

Whether you have a complete drawing, an old belt sample or only machine photos, the first step is to collect the available information and verify the key dimensions.

Need a perforated pre-press belt but do not have a drawing?

Send us your machine details, belt measurements and photos. We can help review the specification and prepare a proposed drawing for your approval.

* E-mail :

can not be empty

* Question :

can not be empty

Related News